|
GTWorks Menu
18 MAIN MENU FUNCTIONS CATEGORIES
| 1. Modals and Fonts | 10. Line |
| 2. Blank/Unblank | 11. Arc/Circle/Fillet |
| 3. Delete | 12. Other Curves |
| 4. Clear/Terminate | 13. Entity Manipulation |
| 5. Special Functions/Applications | 14. Data Verify |
| 6. Data Base Management | 15. Extended Geometry |
| 7. Plot/Input/Ouput | 16. Drafting |
| 8. Display Control | 17. Numerical Control |
| 9. Point | 18. Analysis |
FUNCTION KEYS
Definitions of the function keys used in operating the system
| • <ENTER> = Complete data line entry or select entity | • <ESC/L> Temporary transfer to Line Menu |
| • <A> Arc Select | • <M> Menu display toggle |
| • <CTRL/A> Arc/Circle/Fillet Menu | • <ESC/M> Move menu box |
| • <ESC/A> Temporary transfer to Arc/Circle/Fillet Menu | • <N> Node Select |
| • <B> Zoom Box toggle in Local Pan and Zoom | • <CTRL/N> Interrupt certain software operations |
| • <CTRL/A> Begin Keystroke Logging | • <O> Other Curves Select |
| • <C> Read Cursor | • <P> Point Select |
| • <D> Change Depth | • <CTRL/P> Point Menu |
| • <E> Implicit Point Select for FEP elements | • <ESC/P> Temporary transfer to Point Menu |
| • <CTRL/E> End Keystroke Logging | • <R> Repaint the display |
| • <F> GTWorks Functions Menu | • <CTRL/R> Rebuild the display list file and repaint the display |
| • <CTRL/F> forced return to GTWorks Functions Menu | • <S> Spline Select |
| • <F4> Remove menu from screen | • <ESC/S> Temporary transfer to Modify Surface Paths |
| • <SHIFT/F4> Redisplays the suppressed menu | • <T> Text select |
| • <CTRL/G> Enter local pan and zoom mode | • <ESC/T> Trim Immediate Functions Menu |
| • <H> Sets certain construction modals | • <ESC/U> Keystroke Log creation pause toggle |
| • <I> Zoom in during Local Pan and Zoom | • <CTRL/V> Set or modify entity attributes |
| • <CTRL/J> Return to original display in local pan and zoom mode | • <ESC/V> Temporary transfer to Data Verify Menu |
| • <ESC/J> Same as <CTRL/J> | • <W> Temporary transfer to Change Work View Menu |
| • <CTRL/K> Prompt for keystroke log file | • <CTRL/W> Temporary transfer to Work Coordinate System Menu |
| • <ESC/K> Pause keystroke creation for user comments | • <Z> Temporary transfer to Zoom Single View Menu |
| • <L> Line Select | • <CTRL/Z> Temporary transfer to View Control Menu |
| • <CTRL/L> Line Menu |
FUNCTION SUBMENUS
1. Modals And Fonts
| 1. Menu Display | 11. Grid |
| 2. Periodic Filing | 12. Modal Status |
| 3. Display Tolerance | 13. Title Block |
| 4. System Decimal Places | 14. Reserved |
| 5. Font Editing | 15. Work System Control |
| 6. Line Weight Editing | 16. Interface Definition |
| 7. Modify Entity Level/Pen No. | 17. Automatic Rescale Mode |
| 8. Surface Paths | 18. SIU/English/Resize |
| 9. Geometric Tolerance | 19. Save/Load System Modals |
| 10. Entity Select Control |
2. Blank/Unblank
| 1. Blank All of a Type | 8. Unblank All |
| 2. Blank All Except a Type | 9. Unblank All Of A Type |
| 3. Blank All | 10. Unblank All Of A Type |
| 4. Blank, Select from Type | 11. Unblank N1 To N2 |
| 5. Blank, Select from All | 12. Unblank Levels/Pens/Colors |
| 6. Blank All Except N1 to N2 | 13. Reverse Blank Status |
| 7. Blank Levels |
3. Delete
| 1. Delete All Points | 6. All Not Displayed |
| 2. From Type | 7. All of Displayed Type |
| 3. From All | 8. All of Not Displayed Type |
| 4. Last Entity | 9. All of a Level Range |
| 5. All Displayed |
4. Clear/Terminate
(no submenus)
5. Special Functions/Applications
| 1. Reserved | 10.1 User Created Applications |
| 2. Variable Calculation | 10.2 Flat Pattern |
| 3. Manage Variables | 10.3 Advanced Display Options |
| 4. Keystroke Log Information | 10.4 Nesting |
| 5. Level Management | 11. Color Management |
| 6. Attribute Management | 12. Eagle |
| 7. Timing | 13. Design Element Library |
| 8. Regeneration | 14. Modify Entity View Of Display |
| 9. Bulk Data Input | 15. Third Party Applications |
| 10. Applications | 16. Undo/Redo |
6. Data Base Management
| 1. Part Management | 5. Dump Current Part |
| 2. Pattern Management | 6. Set System Storage Defaults |
| 3. User Tech File Management | 7. Reload Switch File |
| 4. Data Base Information |
7. Plot/Input/Output
| 1. Enhanced Plot II | 5. DXF Interface |
| 2. Drawing Production | 6. Create PDF File |
| 3. Quick Plot | 7. Create JPG File |
| 4. IGES Interface |
8. Display Control
| 1. Modals | 7. View Layout Management |
| 2. Change Depth | 8. Display Name Management |
| 3. Define Auxiliary View | 9. Pan-Zoom-Rotate Widget |
| 4. Z-Clip | 10. Direct3D Shading |
| 5. Change Work View | 11. OpenGL Shading |
| 6. View Control |
9. Point
| 1. Screen Position | 10. Curve Normals |
| 2. Enter Coordinates | 11. Surface Point |
| 3. Polar | 12. Spherical |
| 4. Delta | 13. Application Definitions |
| 5. Vectored | 14. Multiple Points |
| 6. Circle Center | 15. Modify/Replace |
| 7. On a Curve | 16. Text Origin |
| 8. Curve End | 17. Between Two Points |
| 9. Intersect 2 Curves |
10. Line
| 1. Screen Position | 10. Chamfer |
| 2. Enter Coordinates | 11. Intersect 2 Planes |
| 3. Join | 12. Tanto Crv At Angle |
| 4. Tangent To | 13. Divide Into N Segments |
| 5. Horiz, Vert Or Axis | 14 Infinite Status |
| 6. Polar | 15. Modify/Replace |
| 7. Parlel To Line Thru Point | 16. Break Line |
| 8. Parlel To Line At Distance | 17. Delta |
| 9. Perpto Line - Thru Pt or Tan To Curve | 18. Multiple Parallel (Wall Creation) |
11. Arc/Circle/Fillet
| 1. Screen Position & Radius | 8. Polar From Arc |
| 2. Enter Center & Radius | 9. Fillet |
| 3. Center Point & Radius | 10. Tangent To Three Curves |
| 4. Center Point & Tangent Curve | 11. Normal To Work Plane |
| 5. Through 3 Points | 12. Divide Into N Segments |
| 6. Center Point and 2 Edge Points | 13. Modify/Replace |
| 7. Edge Point & Tangent Curve |
12. Other Curves
| 1. Splines | 7. N-gon |
| 2. Offset Curve | 8. Trim/Extend Curves |
| 3. Conics | 9. Convert Curve to Point Set |
| 4. String | 10. Tapered Offset Spline |
| 5. Make String From Lines And Arcs | 11. Convert Point Set To Lines |
| 6. Make Lines/Arcs From String | 12. Convert Curve To NURBS Curve |
13. Entity Manipulation
| 1. Rectangular Array | 10. Stretch |
| 2. Circular Array | 11. Projected Entity |
| 3. Group | 12. Multiple Translations/Rotations |
| 4. Mirror | 13. Curve Cut |
| 5. Translate | 14. Sectional Refont |
| 6. Rotate | 15. Trim/Extend Curves |
| 7. Duplicate and Translate | 16. Trim/Untrim Surfaces |
| 8. Duplicate and Rotate | 17. Independent XYZ Scaling |
| 9. Array Explode | 18. Zero Z Coordinates |
14. Data Verify
| 1. One Entity | 4. Composite Tool Path |
| 2. Two Entities | 5. General Measurement |
| 3. Screen Position | 6. View Dependent Fonts |
15. Extended Geometry
| 1. 3-D Curves | 4. Cross Section Slice |
| 2. Surfaces | 5. Surface Development |
| 3. Surface Normal Manipulation | 6. Bezier Curves/Surfaces |
16. Drafting
| 1. Modals | 10. Crosshatching |
| 2. Dimensions | 11. Surface Finish Symbols |
| 3. Notes | 12. Character Sets |
| 4. Labels | 13. Detail Magnification |
| 5. Feature Control Frames | 14. Tolerance Analysis |
| 6. Balloons | 15. Modify |
| 7. Centerlines | 16. User Defined |
| 8. Section Arrow | 17. Regenerate |
| 9. Arrowhead At Curve End | 18. Associative Text Files |
17. Numerical Control
| 1.NC Modals | 2.7 Wire EDM |
| 2. Toolpath Creation | 2.8 Multi-Surface Milling |
| 2.1 Point To Point | 2.9 Pocket Profile Milling |
| 2.2 Lathe | 2.10 User-Defined |
| 2.3 Milling | 3. Display & Edit |
| 2.4 Surface Milling | 4. Output |
| 2.5 Flame Cutting | 5. NC File Management |
| 2.6 Punching |
18. Analysis
| 1. Spline Analysis | 5. Surface Bounded Volume |
| 2. Curve Analysis | 6. Calculator |
| 3. Section Analysis | 7. Modals |
| 4. Swept/Projected Volume Analysis |