CAD X11^® Common Interface Supplemental Menu

KEY SUBMENU FUNCTIONS

1.0 System Modals

1.1 Menu Display

.1 Refresh Menus

.2 Menu - Mouse Selection

.3 Modify Systems Operation Colors

.4 System Operation Colors On/Off

1.5 Session Recording

.1 Deactivate Recording

.2 Begin Recording

.3 Playback

.4 Playback in Real Time

1.7 Selected Entity Notification

.1 Attention Markers

.2 Highlight with Color Change

1.11 Grid Control

.1 Grid On/Off

.2 Grid Display

.3 Set Grid Specification

.4 Which Key Snaps to Grid

.5 Grid Scale On/Off

5.0 Entity Characteristics

5.1 Entity Font

.1 Solid

.2 Short Dash

.3 Phantom

.4 Centerline

.5 Medium Dash

.6 Long Dash

.7 Dash Dot

.8 Dash Dot Dot

.9 Dash Dash Dot

.10 Dotted

5.2 Level Control (0-1023)

5.3 Pen Control (1-8)

5.4 Color Control (7 colors)

5.5 Weight Control

.1 N Raster Units (1-8)

.2 New Decimal Weight

.3 Modify Old Decimal Weight

.4 Round or Square Corners

.5 Select User Specified Weight

5.7 Attributes Cross-Referencing

5.8 Entity Color Defaults

6.0 Data Base Management

6.1 Drawing Management

.1 Save Drawing as ...

.2 Reload

.3 List Drawings

.4 Delete Drawings

.5 Release Drawing as Final

6.2 Pattern Management

.1 Create

.2 Retrieve

.3 List

.4 Delete

.5 Open Pattern Library

.6 Level Processing

.7 Initialize

.8 Snapshot

.9 Retrieve as Template

12.0 Other Curves

12.3 Conics

.1 Ellipse

.2 Parabola

.3 Hyperbola

.4 General

.5 Modify Angles

12.5 Polygons

.1 Triangle

.2 Rectangle

.3 Hexagon

.4 N-Gon

13.0 Entity Manipulation

13.11 Trim/Extend Curves

.1 One End

.2 Intersection of Two Curves

.3 Middle

.4 Both Ends

.5 To Crosshairs

.6 To a Point

.7 Break Entity at Intersection

.8 Break Entity at Crosshairs

.9 To a Plane

15.0 Extended Geometry (Professional Version)

15.1 Surfaces

.1 Plane

.2 Surface of Revolution

.3 3-D Tabulated Cylinder

.4 Ruled Surface

.5 Developable Surface

.6 Curve Mesh Surface

.7 Fillet Surface

.8 Sphere

.9 Cylinder

.10 Torus

.11 Cone

16.0 Drafting Functions

16.1 Drafting Modals

.1 Character Size

.2 Character Display Ratios

.3 Label and Dimension Origin

.1 Crosshair Position

.2 Key in Coordinates

.3 Delta

.4 Automatic Centering

.4 Arrow or Text Alignment

.5 Drafting Scale Factor

.6 Geometry Scale Factor

.7 Fonts

.1 Standard

.2 Standard with 15 degree slant

.3 Leroy

.4 Leroy with 15 degree slant

.5 Tefont

.6 Tefont with 15 degree slant

.7 Triplex Roman

.8 Helvetica Bold

.9 Helvetica Bold Filled

.10 Helvetica Regular

.11 Helvetica Regular Filled

.12 Windows Fonts

.13 Dummy Lines

.8 Justification

.1 Left

.2 Center

.3 Right

.9 Note and Label Angle

.10 Min Pixel Ht. for Display

.11 Fraction/Tolerance Specification

.12 User-Defined Font

.13 Label Leader Text Row Alignment

.14 Display Modal Status

16.2 Dimension Characteristics

.1 Automatic Dimensions

.1 Decimal

.2 Fractions

.3 Feet

.4 Inches

.5 Feet/Inches (Base in Feet)

.6 Feel/Inches (Base in Inches)

.7 Millimeters

.8 Centimeters

.9 Meters

.10 Dual in Feet/Meters

.11 Dual in Inch/Centimeters

.12 Dual in Inch/Millimeters

.13 Dual in Meters/Feet

.14 Dual in Centimeters/Inches

.15 Dual in Millimeters/Inches

.2 Key in Dimensions

.3 Angular Units

.1 Decimal Degrees

.2 Degrees, Minutes, Seconds

.4 Tolerances/Limits

.5 Witness Line Control

.6 Text/Arrow Control

.7 Decimal Places

.8 Dimension Text Orientation

.1 Horizontal

.2 Parallel to Leader Lines

.9 Dimension Text Positioning

.1 Above Leader Lines

.2 Inserted in Leader Lines

.3 Below Leader Lines

.10 Ordinary / Basic / Reference

.11 Arrow Type

.12 Arrowhead Length

.13 Dimension Offset Distances

.14 Dimension and Text View Display

.15 Radius Indicator

.16 Diameter Indicator

.17 Linear Dimension Prefix/Suffix

.18 Display Characteristics Status

16.3 Cross Hatching

.1 Iron/Brick/Stone Masonry

.2 Steel

.3 Bronze/Brass/Copper

.4 Plastic/Rubber

.5 Refractory Material

.6 Marble/Slate/Glass

.7 Lead/Zinc/Magnesium/Insulation

.8 Aluminum/Aluminum Alloys

.9 Solid

16.6 Linear Dimensions

.1 Horizontal

.2 Vertical

.3 Parallel

.4 Point-to-Point

.5 XT Ordinate

.6 YT Ordinate

.7 Running Horizontal

.8 Running Vertical

16.12 Edit Drafting Entity

.1 Origin

.2 Character Size

.3 Character Display Ratios

.4 Font

.5 Justification

.6 Arrow Type

.7 Ordinary/Basic Dimension

.8 Linear Dimension Arrows In/Out

.9 Move Dimension Reference

.10 Align Arrows or Text

.11 Convert Fractions to Decimal

.12 Geometric Characteristic

.13 Add Prefix/Suffix

.14 Reverse Leader End

.15 Witness Line Control

.16 Explode Witness Lines

.17 Label Leader Text Row Alignment

18.0 Additional Applications

18.1 Property Management

.1 Create

.2 Display

.3 Delete

.4 Assign

.5 Bill of Materials

18.2 Design Element Library (Professional Version)

.1 Bolts

.2 Screws

.3 Nuts

.4 Washers

.5 Pins

.6 Rivets

.7 Set Screws

.8 Holes

.9 Slots

.10 Splines/Teeth

.11 Pipe/Hydraulic Fittings

.12 Symbols

.1 Weld Symbols

.2 Finish Marks

.13 Miscellaneous

.1 Grease Fittings

.2 Retaining Rings

.3 Springs

.14 Modals